We at OCTANORM want you to have simply the best user experience when using our website. For some functions we use browser cookies, e.g. for displaying personalized content or for the sign in procedure. You must agree to the storage of browser cookies as some of these functions can not be used otherwise. If you have any questions, please do not hesitate to contact us at webmaster@octanorm.de

ABOUT MAXIMA

Maximum creative freedom for exhibition builders. Maximum quality. Maximum longevity. And the highest possible stability, allowing for maximum weight suspension. For the MAXIMA system, the name says it all. Since its introduction, it became the gold standard for exhibition systems worldwide. With more than 90 profiles, MAXIMA is also the most diverse system worldwide. Thanks to over a hundred accessories, the MAXIMA system shows its full potential especially in big projects with wide spans. Developed with professionals in mind, MAXIMA does require technical know-how, but offers a maximum of creative freedom.

Trust the brand that makes “big” feasible:
MAXIMA by OCTANORM

VERSATILE. FLEXIBLE.
CUSTOMIZED.

THE SYSTEM THAT IS OUT OF THE ORDINARY.

MAXIMA 40

Do you need a system that is ideally suited for
smaller exhibition stands, displays and the retail
sector? That’s no problem with Maxima 40.
Thanks to its low weight and extrusion depth, it
can be used for furniture all the way to individual
stand constructions. And up to a construction
height of 3 metres: completely covered with
fabric and panels, exposed, or in combination
with the OCTAfloor floor system and the OCTAwall
40 wall system. OCTAlumina 40 provides
additional bright accents. Get the most out of
your products – over and over again.

LIGHTWEIGHT. FILIGREE.
CONVERTABLE.

THE MAXIMUM IN RETAIL AND DISPLAY MARKET.

Display, retail, or exhibition?
Everything!

Short assembly times and quick change of location. This is precisely where the strengths of Maxima 40 lie. Small, light and versatile, it is suitable for any product and can be easily transported.

Maxima 40 - sportliche Schaufensterpuppen

Fashion today,
food tomorrow.

With Maxima 40 you don‘t have to do without your corporate design! Our system can be dressed up over and over again. With glass, panels or fabrics. On one or both sides. Quickly adaptable thanks to practical system groove.

Our system groove. Countless
possibilities.

Wallwashers, shelves, magnetic holders and much more – A variety of accessories can be inserted into our system groove. Perfectly coordinated, additional features and articles can be easily added.

TECHNICAL DETAILS

Lightweight

Thanks to the light weight of aluminium and a small extrusion crosssection of 40 mm, Maxima 40 can be mounted and transported without much effort. This ensures a quick set-up of large exhibition areas in no time.

Can be equipped with fabric, glass and panels

Different extrusions allow for easy mounting of fabric, glass and panels, making Maxima 40 even more flexible in use.

Individual furniture thanks to extrusions in RAL colours

Customised furniture, according to your ideas and requirements! Exposed or dressed up. Due to the low extrusion depth, the profiles are perfectly suited for use as product carriers – without distracting from the product. And can be rearranged, combined and adapted again and again. Coated in your RAL colour on request.

Easily combinable with other systems

The extrusion depth of 40 mm is compatible with other systems like OCTAlumina 40 or Maxima.The extrusion depth of 40 mm is compatible with other systems like OCTAlumina 40 or Maxima.

High resolution and vibrant colours

The high printing quality of 1000 dpi allows for breathtaking renditions of even the smallest details. Thanks to the UV colours, the fabric stays flexible and the print is brilliant and with high contrasts. This way, you can see details even in darker areas. The fabric is tearproof and slightly elastic for a hassel-free installation in the light box. The CNC laser cutting and assembly with silicone edges with special sewing machines ensure a perfect fit. All backlit fabrics have a B1 certificate (hard to ignite).

You have a question concerning the ideal fabric for your light box? Ask us!

MAXIMA 80

The optimal system for your exhibition stand: The extrusion depth of 80 mm offers stability for heights up to 6 metres – free-standing, or as a complete room solution including door element. Can be completely covered with fabric and panelling. Additional attention is drawn to your advertising message by integrated LED panels and OCTAlumina light frames. Some installation types are even supplied with proof of stability. As versatile and combinable as no other system. In short: With Maxima 80, you are already ready for the future.

VERSATILE. DURABLE. DYNAMIC.

THE MAXIMUM OF FREEDOM.

Perfect for exhibitions? Yes. But not just
exhibitions!

Versatile. Stable. Adaptable. Everything you need at an exhibition. Reusable and light due to the aluminium material. Perfectly combinable with other OCTANORM systems. A system with added value, which is suitable for exhibitions of any kind. With Maxima 80 you stay flexible.

Setting light in motion.

OCTAlumina dynamic light brings your fabric motifs to life. Individually controllable LEDs can be used to highlight or dim specific areas. Underline your advertising message and change simple surfaces with exciting RGB colour changes. The same motif. A completely different effect.

From floor to ceiling.

Whether visible or not, the Maxima 80 extrusions always achieve top performance. Besides the cladding with panels or fabrics, the main advantage of the system is its compatibility with other systems such as OCTAlumina 80 light frames, OCTArig ceiling construction or also OCTAuniversal as substructure. Furthermore, the proof of stand stability is already integrated for some OCTAuniversal kits – efficient and cost-saving.

Videos instead of pictures: LED Panels.

It is hard to imagine exhibition stands without LED panels. But this does not require a complicated substructure. The LED panels are simply hooked into the keyholes of the OCTAuniversal upright using our special brackets. This way you can always integrate the latest panels from the manufacturer you trust. Highest quality. Highest safety. Without restrictions.

Maxima 80 LED - LED-Display in front of upright

OCTAuniversal upright: various modules are simply hooked into the keyholes on site.

The adapters can be mounted onto LED panels of different manufacturers.

Floor plates installed in the double floor enable free-standing walls up to 6 metres high.

TECHNICAL DETAILS

Sturdy yet lightweight

The material aluminium together with the extrusion cross-section of 80 mm results in a perfect ratio between stability and weight - up to a construction height of 6 m.

Can be equipped with fabric, glass and panels

Different extrusions allow for easy mounting of fabric, glass and panels, making Maxima 80 even more flexible in use. Upon request, the extrusions can be coated in your RAL colour.

LED video wall

Combined with OCTAuniversal uprights, complete video walls can be installed. The adaptors that can be fitted into the rails are compatible with LED panels from different manufacturers.

Easily combinable with other systems

The extrusion depth of 40 mm is compatible with other systems like OCTAlumina 80, OCTAwall pro, OCTAwall custom und OCTArig.

High resolution and vibrant colours

The high printing quality of 1000 dpi allows for breathtaking renditions of even the smallest details. Thanks to the UV colours, the fabric stays flexible and the print is brilliant and with high contrasts. This way, you can see details even in darker areas. The fabric is tearproof and slightly elastic for a hassel-free installation in the light box. The CNC laser cutting and assembly with silicone edges with special sewing machines ensure a perfect fit. All backlit fabrics have a B1 certificate (hard to ignite).

You have a question concerning the ideal fabric for your light box? Ask us!

MAXIMA 120

Extrusions as a design element? With their slick
and balanced shape, Maxima 120 and 160 are
particularly suitable for designs that play with
cladding and exposed extrusions. Can be installed
up to 6 meters high, the system promises to
stand out from the crowd – and thanks to special
coating also in your desired colour.

STYLISH. SLICK. SUPPORTABLE.

STABILITY THAT YOU CAN SEE.

Exposed. And dressable.

Just like the rest of the Maxima family, the system can be clad with panels and fabrics. On one or both sides. Stably and securely mounted – ready to spread your exhibition message. The carrier system OCTArig and the doubledecker system OCTAmax 350 create additional space at your stand space. Further eye-catchers can also be placed in combination with OCTAlumina 120. Leave nothing to chance and guide the attention of your visitors!

Big, bigger, Maxima.

Visible constructions and extrusions. Stand designs that require a lot of freedom. With an extrusion depth of 120 and 160 mm, this system focusses on its columnar appearance. Large areas bridge the high span width in a simple way – without any further support. And so that the system matches your brand image, the extrusions can be coated in your desired colour: Maxima 120 or 160 as a supporting design element.

TECHNICAL DETAILS

7 m construction height and large spans

The extrusion cross-section of 120 mm allows for heights and spans of up to 7 m. The high load capacity of the system can be increased by additional fixing angles.

Can be equipped with fabric, glass and panels

Different extrusions allow for easy mounting of fabric, glass and panels, making Maxima 120 even more flexible in use.

Individual column design with extrusions in RAL colour

While Maxima 120 is defined by our system groove, the main focus of Maxima 160 is on the pillar character of the system. Without a visible groove, it impresses with a nice and smooth surface. Upon request, the extrusions can be coated in your RAL colour.

Easily combinable with other systems

The extrusion depth of 40 mm is compatible with other systems like OCTAlumina 120 oder OCTAmax 350..

High resolution and vibrant colours

The high printing quality of 1000 dpi allows for breathtaking renditions of even the smallest details. Thanks to the UV colours, the fabric stays flexible and the print is brilliant and with high contrasts. This way, you can see details even in darker areas. The fabric is tearproof and slightly elastic for a hassel-free installation in the light box. The CNC laser cutting and assembly with silicone edges with special sewing machines ensure a perfect fit. All backlit fabrics have a B1 certificate (hard to ignite).

You have a question concerning the ideal fabric for your light box? Ask us!